MitySOM-A10S Development Kit - Altera® Arria® 10 SoC
The MitySOM-A10S Development Kit supports Critical Link’s Altera Arria® 10 SoC based modules. Each kit includes a compatible MitySOM-A10S module and a base board that together feature an array of interfaces and expansion headers such as FMC, USB 2.0 OTG, USB Console, PCI-e x4 Expansion Header, Gigabit Ethernet, and eMMC/SD Card.
By Critical Link LLC
MitySOM-A5E Mini: Agilex™ 5E System on Module "Mini"
The MitySOM-A5E Mini is a system on module featuring an Altera Agilex 5E SoC (System on a Chip) and includes up to 656KLE FPGA fabric, dual core Cortex-A55 + dual core Cortex-A76, on-board power supplies, and memory subsystems. The Altera Agilex 5 delivers 2.5x the performance at 50% less power consumption versus the Cyclone V SoC.
By Critical Link LLC
%20block%20diagram.png)
MitySOM-A5E Standard: Agilex™ System on Module "Standard"
The MitySOM-A5E Standard is a system on module featuring an Altera Agilex 5E SoC (System on a Chip) and includes up to 656KLE FPGA fabric, dual core Cortex-A55 + dual core Cortex-A76, on-board power supplies, and memory subsystems. The Altera Agilex 5 delivers 2.5x the performance at 50% less power consumption versus the Cyclone V SoC.
By Critical Link LLC
PIB
PIB is an intelligent development platform based on an Intel x86 i7 CPU and Cyclone V GT FPGA, designed for applications such as industrial control, vision optimization, and edge computing.
By Terasic Inc.
Proc10A-40GigE: 40GigE Vision Frame Grabber\Smart NIC
Proc10A-40GigE vision Frame Grabber & Image Processing System Smart NIC
By Gidel
859x345.png)
Proc10A-CXP6: CoaXPress-6 Frame Grabber & Image Processing
The Proc10A-CXP6 is a 8 x CoaXPress-6 Frame Grabber card with option for real-time image processing and compression. The card is supported by off-the-shelf modular building blocks for embedding in the acquisition pipeline, including HDR, white balance, gamma correction, compression (JPG, lossless, Quality+), and more. It is also supported by Gidel's InfiniVision acquisition architecture, optimized for grabbing from 100 + cameras.
By Gidel
Silicom FPGA SmartNIC N5013/N5014 Series
The Silicom N5013/N5014 FPGA SmartNIC, based on the Stratix® 10 DX 2100 FPGA, is a high-performance programmable PCIe server adapter. It features 100Gbps quad-port Ethernet and 8GB HBM2 memory, providing 512GB/s of total aggregate bandwidth. Use cases include NFV, MEC, cybersecurity, high-performance computing, finance, and mobile access and core networks.The N5014 is equipped with 2 x Intel E810 for a standardized interface between FPGA and the host system providing the full range of features of these controllers on the host side.
By Silicom Ltd.
Silicom FPGA SmartNIC N6010/6011 (N6001-PL/N6000-PL Arrow Creek)
The Silicom FPGA SmartNIC N6010/N6011 is a high-performance OEM hardware platform built on Altera’s Agilex™ AGFB014 FPGA with an embedded quad-core ARM Cortex-A53 HPS, designed to accelerate mobile 4G/5G baseband or distributed units via dual QSFP28/56 ports. Based on Intel/Altera N6000-PL.
By Silicom Ltd.
Starter Platform for OpenVINO™ Toolkit
Starter Platform for OpenVINO™ Toolkit is a PCIe based FPGA card with high performance and competitive cost. It's equipped with the largest Cyclone V GT（or GX）device at 301K LE and it supports PCIe Gen 2 x4(GX device will support PCIe Gen 1 x4). The board comes with 1GB DDR3, 64MB SDRAM, UART-to-USB interface, and extension headers such as GPIO and Arduino. This makes Starter Platform for OpenVINO™ Toolkit a re-configurable platform with adequate computing performance and low power consumption.
By Terasic Inc.